News

INTAMSYS Launches FUNMAT PRO 610HT NEO at Formnext 2026

Written by INTAMSYS | Nov 17, 2026, 1:00:00 AM

INTAMSYS unveiled the FUNMAT PRO 610HT NEO industrial FFF 3D printer at Formnext in Frankfurt, Germany, on November 17, 2026. The exhibition runs November 17-20. 

Moving from individual parts to reliable batch production requires industrial 3D printing to deliver productivity, part performance, and production stability.

Orders for high-performance material parts often come with competing demands: tighter deadlines, higher performance requirements, and consistent quality across every batch. For print service providers and manufacturers, meeting these demands requires higher throughput, repeatable part quality, and equipment built for reliable, continuous operation.

Designed to address these needs, the FUNMAT PRO 610HT NEO combines faster printing, stronger parts, and smarter production features, including new AI-powered print defect detection. Guided by “Faster. Stronger. Smarter. Production at Scale.”, the system helps users scale high-performance material applications from individual parts to reliable batch production.

 Turn Higher Productivity into Faster Delivery 

In batch production, printing time directly affects delivery schedules, while consistent part performance and quality remain essential. Faster printing delivers value by making better use of machine time while meeting part requirements.

The FUNMAT PRO 610HT NEO features improvements in three key areas:

 Lightweight, High-Rigidity Motion Platform 

 A lightweight, rigid design reduces moving mass and inertia to enable faster, smoother motion. 

 Higher Extrusion Flow Rate 

 Greater heating capacity and improved heat transfer increase the maximum extrusion flow rate, ensuring a consistent material supply during high-speed printing. 

 Optimized Motion Planning 

 Refined speed planning along curved paths and smoother speed transitions help reduce surface artifacts during high-speed printing. 

Together, these improvements increase productivity while maintaining mechanical strength, dimensional accuracy, and surface quality. The FUNMAT PRO 610HT NEO delivers twice the printing speed of the previous generation. PEEK parts achieve more than twice the Z-axis tensile strength of parts printed on the previous generation, providing greater interlayer strength for functional applications.

Higher throughput and consistent part quality help shorten lead times and lower production costs per part. Producing more with the same equipment investment helps users achieve a higher return on investment.

 The 610 × 508 × 508 mm build volume accommodates multiple parts in a single build as well as large functional components. A chamber temperature of up to 260°C, chamber temperature uniformity of ±2.5%, and a nozzle temperature of up to 500°C provide a stable, high-temperature processing environment for materials such as PEEK, PEI, and PPSU. These capabilities help users take on a broader range of production orders. 

 Smarter Monitoring and Alerts Simplify Production Management 

As print jobs run longer and printer fleets grow, tracking progress, identifying issues, and responding quickly become critical to reliable delivery.

The FUNMAT PRO 610HT NEO integrates a built-in camera, remote video monitoring, remote control, and remote printing, giving users centralized visibility into job progress and machine status. Alerts for nozzle clogs, filament tangles, and other issues help operators respond promptly, reducing the need to check each machine manually and minimizing disruptions to production schedules.

AI-powered print defect detection uses real-time image recognition to help identify printing anomalies, providing additional oversight during long production runs.

 Less Manual Intervention. More Continuous Production. 

Reliable production also depends on routine tasks such as bed leveling, calibration, keeping filament dry, and replacing empty spools. The FUNMAT PRO 610HT NEO automates these tasks to reduce repetitive work and production interruptions.

One-click automatic bed leveling at high temperatures and automatic dual-nozzle offset calibration simplify print preparation.

Four independent filament chambers each accommodate a spool weighing up to 3 kg. Active heated drying in the chambers, combined with filament path drying, helps keep materials dry throughout long print jobs.

Automatic filament switching reduces downtime caused by empty spools and supports 24/7 continuous printing.

Thermal control, optimized motion and extrusion, automatic calibration, and material management work together to support consistent print quality across batches and machines. These capabilities help users turn successful individual prints into repeatable production results.

 More Materials. More Production Possibilities. 

The FUNMAT PRO 610HT NEO supports PEI 9085 and PEI 1010, PEEK and its carbon fiber and glass fiber reinforced variants, PEKK, PPSU, and reinforced PPS and PPA materials. It also supports a broad range of engineering materials and composites in the PC, PA, ASA, ABS, and PET families, giving users the flexibility to select materials for different production requirements.

For print service providers, broader material compatibility and higher productivity create opportunities to accept a wider variety of orders. For manufacturers, these capabilities enable in-house batch production of high-performance functional parts, jigs, and fixtures, reducing lead times associated with outsourcing and allowing a faster response to production needs.

With the FUNMAT PRO 610HT NEO, INTAMSYS addresses the practical demands of industrial production: meeting part performance requirements under tight deadlines, reducing manual intervention during extended operation, and maintaining consistent quality across production batches.

Faster. Stronger. Smarter.
Production at Scale. 

FUNMAT PRO 610HT NEO: Frequently Asked Questions

What is the FUNMAT PRO 610HT NEO designed for?

The FUNMAT PRO 610HT NEO is designed for batch production of high-performance material parts. Its large build volume accommodates multiple parts in one build or large functional components, helping print service providers and manufacturers meet production requirements.

Which materials can the FUNMAT PRO 610HT NEO print?

Supported materials include PEEK, PEEK-CF, PEEK-GF, PEKK, PEI 9085, PEI 1010, PPSU, and reinforced PPS and PPA materials. The system also supports engineering materials and composites in the PC, PA, ASA, ABS, and PET families.

How does the FUNMAT PRO 610HT NEO support continuous production?

Four independent filament chambers accommodate spools weighing up to 3 kg each. Active heated drying and filament path drying help keep materials dry, while automatic filament switching reduces interruptions when a spool runs out. Together, these features support 24/7 continuous printing.

What automation and monitoring features are available?

The system offers automatic bed leveling at high temperatures and automatic dual-nozzle offset calibration. Remote video monitoring, remote control, and remote printing help users manage their printer fleets, while AI-powered print defect detection and alerts for nozzle clogs and filament tangles help operators identify issues and respond promptly.